Geogrid soil stabilization_ High strength polyester warp knitted geogrid_ The polyester geogrid is made of high-strength polyester industrial filament, which is woven into a grid fabric through warp knitting and directional weaving. It is then coated with PVC and processed into a geogrid.

Unidirectional plastic geogrid refers to a geogrid made of high-density polyethylene (HDPE) as the raw material, which is extruded, punched, heated, and stretched into a sheet, extruded and pressed into a regular mesh, and then stretched longitudinally.

The material of Geotextile tube is generally made of high toughness polypropylene, which is generally black; Adjust according to different specifications of products; The length is unlimited, and the width can be spliced multiple times without limiting the width; The filling height is basically set at two-thirds of the diameter of the pipe bag.

The top surface of the conical protrusion is bonded with a layer of filter geotextile to prevent the passage of soil particles, thereby avoiding blockage of the drainage channel and ensuring smooth drainage of the hole. The traditional drainage method uses bricks and tiles as the filter layer, uses more pebbles or crushed stones as the filter layer, and discharges water to designated locations.

Drainage Cell with Geotextile is a lightweight board formed by heating and pressing high-density polyethylene (HDPE) or polypropylene (PP), which can not only create a drainage channel with a certain three-dimensional space support stiffness, but also store water.

The composite drainage board has three special structures. The middle ribs are rigid and arranged longitudinally to form a drainage channel. The composite drainage Flat noodles of the ribs arranged crosswise up and down forms a support to prevent the geotextile from embedding into the drainage channel, and can maintain high drainage performance even under high loads.

3k carbon fiber cloth is woven in both plain and twill directions using 3k as the raw material. Each roll is 1 meter wide and 100 meters long, and special specifications can be customized to meet different needs. With excellent characteristics such as light weight, good flexibility, and corrosion resistance, it is a material used for advanced decoration.

Type: HTC01P-100
Warp: 1k
Weft: 1k
Weave: plain
Warp: 7.5
Weft: 7.5
Weight(g/m²): 100
Thickness(mm): 0.14
Width(cm): 80-150

It is a high strength, high modulus unidirectional carbon fiber fabric.
It is laminated with epoxy resin adhesive to form a carbon fiber reinforced polymer lamination (CFRP) used in structural strengthening.
Carbon fiber not only has high strength and high elastic modulus, but also possesses the characteristics of light self- weight and high durability.

Carbon Fiber Reinforced Epoxy includes carbon fiber primer carbon fiber leveling adhesive, carbon fiber impregnated adhesive.
■ Primer used for improving the properties of the concrete surface, which is indirect contact with the carbon fiber system.
■ Leveling Adhesive, used for leveling and repairing physical defect on the concrete surface of the existing structure.
■ Impregnating Adhesive, used for impregnating carbon fibers and bonding the carbon fiber fabric to concrete surface.

Steel plate bonding epoxy is double component epoxy based adhesive with strong bonding strength, shear strength. It is used for seismic reinfocement of buildings and strcutures.

Injectable chemical anchor is a fast curing, multi-purpose, two components modified epoxy resin anchor system for threaded bars and reinforcing bars in both cracked and uncracked concrete.